1984 Chevrolet Power OEM Performance C3 C4 Corvette Book - $20 in Nanaimo, British Columbia for sale

Chevrolet Power: Technical Data - Specifications - Special Parts - 5th Edition
Published by Chevrolet Motor Division, General Motors Corp., 1984
Covers heavy-duty parts,blueprinting,blocks,cranks,con rods,pistons,rings,camshafts,etc.
This manual covers the build up of the SBC and BBC referred to as Mark IV Large Block, plus 60 degree V6 and 90 degree V6 and Twin Cam Cosworth. Vehicle dynamics, Corvette and General Performance sections also.
Interesting section on building a performance Small Block 400. There are also cam charts on both SBC and BBC with part numbers and original performance applications to help one choose the proper cam for their application. Full engine charts too on all V8's produced up to 1984 detailing displacement, bore, stroke, journal size, 2 or 4 bolt mains etc....
Contains eight sections: 60 degree V-6, 90 degree V-6, V-8 Small Block, Mark IV Large Block, Twin-Cam Cosworth Vega, Corvette, Vehicle Dynamics, and General Information
Corvette C3 and C4 Chassis prep for competition. show chassis modifications to make to stiffen the frame all the way to beefing up the tranny and rear end and setting up the suspension. The whole of Chapter 6 is devoted to "Corvette Chassis Preparation" (based on the C3) and tells where to strengthen the frame, where to add gussets, where and how to weld the seams, where to weld plates, and the optimum places to attach a roll bar/cage. It also tells how to set up the suspension, blueprint the engine, best parts to use, etc.
GM part is PUB. #MO12. This book is a standard 8 1/2 x 11 and about half an inch thick. Approximately 200 pages
Excellent condition, no loose or missing pages.
PAYPAL?WILL SHIP!