ShipModul Miniplex 2-Wi Multiplexer in Nanaimo, British Columbia

ShipModul 2 Wi-fi, USB, and NMEA0183 multiplexer. Absolutely invaluable and necessary when combining chartplotters, laptop/desktop navigation software, autopilots, AIS and DSC data, and NMEA 0183 Instrumentation. Working perfectly.

Advanced filtering and routing system allows data to be sent to other navigation instruments and to computers, tablets and smartphones.

A bi-directional SeaTalk1 interface enables conversion between SeaTalk1 data and NMEA 0183 sentences. This conversion works both ways, allowing the MiniPlex-2 to replace Raymarine's SeaTalk-NMEA bridge (E85001).

All data is available on one or more computer interfaces in NMEA 0183 format. SeaTalk datagrams for which no NMEA 0183 equivalent exists, can be converted to special NMEA 0183 sentences.

Each and every port on a MiniPlex-2 multiplexer is galvanically isolated from the internal electronics and from every other port. This guarantees that no ground loops will be created when adding a MiniPlex-2 to a navigation network. It also ensures a trouble free connection to any type of NMEA 0183 port of any device.

MiniPlex-2Wi Technical specifications:
Supply voltage: 8-35VDC, secured against reversed polarity

Current consumption: 70mA (120mA max. with fully loaded talker ports)

Computer interface: WiFi (802.11b/g, +10dBm), supporting TCP, port 10110, USB, galvanically isolated

Supported protocols: TCP/IP, port 10110 for NMEA 0183 data ARP, ICMP and DHCP for network management

Inputs: 4 x NMEA 0183/RS-422, galvanically isolated. Input 1 can be set to SeaTalk mode

Input resistance: > 1.4 kOhm

Input current: 0.5mA @ 2V , 3.0mA @ 5V, 7.1mA @ 10V

Outputs: 2 x NMEA 0183/RS-422, galvanically isolated

Max ouput current: 20mA @ > 2V

Filter list size: 50 sentence types

Priority list size: 50 sentence types

Speed NMEA In 1-3: 4800 - 57600 baud

Speed NMEA In 4/Out 1: 4800 - 57600 baud

Speed NMEA Out 2: 4800 - 115200 baud

Dimensions: 138 x 62 x 30mm

Connector: M12 male Micro-C